首页 > 产品中心| Analog Multiplexers, Demultiplexer IC | |||||
| Part No. | Features | VCC | IQ(ΔVsw≦500mV/TA=25℃) | Package | |
| PD(mW) | VCC | VEE | |||
| RON | ΔRON | ||||
| USA3157 | Single-Pole, Double-Throw Analog Switch | 1.65 V ~ 5.5 V | 1uA(Max) | SOT-26 SOT-363 | |
| - | 4.5V | - | |||
| 7 | 0.15 | ||||
| US5C3253 | Low-Voltage Dual 1-of-4 FET Multiplexers/Demultiplexer | 2.3V ~ 3.6 V | 10uA(Max) | DIP-16 SOP-16 TSSOP-16 | |
| 500mW | 2.3V | - | |||
| 40 | - | ||||
| US5C3257 |
Quad 2:1 Mux/Demux Bus Switch * 5Ω switches connect inputs to outputs * ESD protection on pin * Near zero propagation delay * Ultra Low Quiescent Power (0.2μA Typical) –Ideally suited for notebook applications * Direct bus connection when switches are ON * Pin compatible with U74 series logic devices |
4.5 V ~ 5.5 V | 3uA(Max) | DIP-16 SOP-16 TSSOP-16 | |
| 500mW | 5V | - | |||
| 7 | - | ||||
| US5V330 |
Low On-Resistance Wideband/Video Quad 2-Channel Mux/DeMux * Single supply operation: +5.0V * Low Power Consumption (0.1μA typical) * Wide bandwidth: 360 MHz (typical) * Low On-Resistance: 5Ω (typical) * Low crosstalk at 10 MHz: -48 db * Control Inputs Can Be Driven by TTL or 5-V/3.3-V CMOS Outputs |
4.5 V ~ 5.5 V | 3uA(Max) | DIP-16 SOP-16 TSSOP-16 | |
| 500mW | 5V | - | |||
| 10 | - | ||||
| UAS4684* | Low-Voltage, Dual, SPDT Analog Switch | 1.8 V ~ 5.5 V | 1uA(Max) | SOT-26 SOT-363 | |
| - | 5.0V | - | |||
| 1.1Ω(Max) | 0.12Ω(Max) | ||||
| U74LVC1G66 |
Single Bilateral Analog Switch * Operation Voltage Range: 1.65~5.5V * Low Power Dissipation: ICC=10μA(Max) * Inputs Accept Voltages to 5.5V * Max Tpd of 0.8 ns at 3.3V * High Degree of Linearity |
1.65V~5.5V | 10uA(Max) | SOT-25 SOT-23-5 SOT-353 | |
| - | 4.5V | 0V | |||
| RAIL = 10Ω(Max) | - | ||||
| PEAK = 15Ω(Max) | - | ||||
| U74LVC2G66 |
Dual Bilateral Analog Switch * Wide Supply Voltage Range from 1.65V to 5.5V * Up to 5.5V Inputs Accept Voltages * Max tPD of 0.8 ns at 3.3V * High ON-OFF Output Voltage Ratio * High Degree Of Linearity * High Speed, Typically 0.5 ns at VCC = 3 V, CL = 50 pF * Rail-to-Rail Input/Output * Low On-State Resistance, Typically 6 Ω at VCC = 4.5 V |
1.65V~5.5V | 1uA(Max) |
SOP-8 MSOP-8 TSSOP-8 DFN2030-8 CDFN2030-8 |
|
| - | 4.5V | 4.5V | |||
| RAIL = 10Ω(Max) | 2 Ω(Max) | ||||
| PEAK = 15Ω(Max) | - | ||||
| U74LVC1G3157 |
Single-pole, Double-Throw Analog Switch * Useful in Both Analog and Digital Applications * Rail-to-Rail Signal Handing * Low ON Resistance:<10Ω on Typical @ 3.3V VCC * Broad VCC Operating Range:1.65V to 5.5V * Over-Voltage Tolerance of Control Input to 6.5V |
1.65V~5.5V | 1uA(Max) | SOT-363 | |
| - | 4.5V | 4.5V | |||
| 15Ω(Max) | 0.15Ω(Max) | ||||
| U74LVC2G3157 | Dual-pole, Double-Throw Analog Switch | 1.65V~5.5V | 1uA(Max) | SOP-8 MSOP-8 TSSOP-8 | |
| - | 4.5V | - | |||
| RAIL = 15Ω(Max) | |||||
| U7SB3157 |
10Ω SPDT Analog Switch *Useful in Both Analog and Digital Applications *Specified Break-Before-Make Switching *Low ON-State Resistance:10Ω *Wide Single-Supply Operation:1.65V to 5.5V |
1.65V~5.5V | 1uA(Max) | MSOP-10 | |
| - | 4.5V | 4.5V | |||
| 10Ω(Max) | 0.15 Ω(TYP) | ||||
| U74AHC1G66 |
Bilateral Switch * Operation voltage range: 2~5.5V * Low power dissipation * Very low ON-resistance: 26Ω (typ.) at VCC=3.0V 16Ω (typ.) at VCC=4.5V 14Ω (typ.) at VCC=5.5V |
2.0V~5.5V | 1uA(Max) | SOT-25 | |
| 250mW | 5.5V | 0V | |||
| RAIL = 22Ω(Max) | - | ||||
| PEAK = 30Ω(Max) | - | ||||
| U74AHCT1G66 |
Single Bilateral Analog Switch * Operation voltage range: 2~5.5V * Low power dissipation * Very low ON-resistance: 26Ω (typ.) at VCC=3.0V 16Ω (typ.) at VCC=4.5V 14Ω (typ.) at VCC=5.5V |
4.5V~5.5V | 1uA(Max) | SOT-353 | |
| 250mW | 5.5V | 0V | |||
| RAIL = 22Ω(Max) | - | ||||
| PEAK = 30Ω(Max) | - | ||||
| U74HC1G66 |
Bilateral Switch * Operation voltage range: 2V~9V * Very low ON-resistance * Low power dissipation * Very small 5 pins package |
2.0V~10.0V | 20uA(Max) | SOT-25 SOT-353 | |
| 200mW | 9.0V | 0V | |||
| RAIL = 78Ω(Max) | - | ||||
| PEAK = 88Ω(Max) | - | ||||
| U74HCT1G66 |
Single Bilateral Analog Switch * Operation voltage range: 2V~9V * Very low ON-resistance * Low power dissipation * Very small 5 pins package |
4.5V~5.5V | 10uA(Max) | SOT-25 | |
| 200mW | 4.5V | 0V | |||
| RAIL = 106Ω(Max) | - | ||||
| PEAK = 118Ω(Max) | - | ||||
| U74AHC4066 |
Quad Bilateral Analog Switch * Operate From 2V to 5.5V * Max tPD of 7ns at 5 V * Low Power Dissipation: ICC=20μA(Max) * Low Input Current: II(L)=1μA(Max) |
2.0V~5.5V | 2uA(Max) | SOP-14 TSSOP-14 | |
| 500mW | 4.5V | 4.5V | |||
| RAIL = 75Ω(Max) | 15Ω(Max) | ||||
| PEAK = 100Ω(Max) | - | ||||
| U74AHCT4066 |
Quad Bilateral Analog Switch Multiplexer * Inputs Are TTL-Voltage Compatible * Max tPD of 6ns at 5 V * Low Power Dissipation: ICC=2μA(Max) * Low Input Current: IIN=1μA(Max) |
4.5V~5.5V | 2uA(Max) | SOP-14 | |
| 500mW | 4.5V | 4.5V | |||
| RAIL = 75Ω(Max) | 15Ω(Max) | ||||
| PEAK = 100Ω(Max) | - | ||||
| U74HC4066 |
Quad Bilateral Switches * Operation voltage range: 2~10V * Very low “ON” resistance: VCC=4.5V, 50Ω VCC =6V, 45Ω VCC =9V, 35Ω |
2.0V~10.0V | 40uA(Max) | SOP-14 TSSOP-14 | |
| 500mW | 9.0V | 9.0V | |||
| RAIL = 78Ω(Max) | 3Ω(Max) | ||||
| PEAK = 88Ω(Max) | - | ||||
| U74HCT4066 |
Quad Bilateral Analog Switch Multiplexer *Operation voltage range: 4.5V~5.5V *Very low “ON” resistance: 50Ω(Typ.)@VCC=4.5V |
4.5V~5.5V | 20uA(Max) | SOP-14 TSSOP-14 | |
| 500mW | 4.5V | 4.5V | |||
| RAIL = 106Ω(Max) | 3Ω(TYP) | ||||
| PEAK = 118Ω(Max) | - | ||||
| 4066 |
Quad Bilateral Switch * Wide supply voltage range: 3V ~ 15V. * High noise immunity : 0.45VDD (typ.) * Wide range of digital and ± 7.5VPEAK analog switching * “ON” resistance for 15V operation : 80Ω * Matched ”ON” resistance : ΔRON=5Ω (typ.) over 15V signal input * “ON” resistance flat over peak-to-peak signal range * High “ON” / “OFF” : 65 dB (typ.) output voltage ratio @ fIS=10kHz, RL=10kΩ * High degree linearity: 0.1% distortion (typ.). @ fIS=1kHz, VIS=5Vp-p. * VDD-VSS=10V, RL=10kΩ * Extremely low ”OFF” : 0.1nA (typ.) * switch leakage @VDD-VSS=10V, TA=25°C * Extremely high control input impedance : 1012Ω (typ.) * Low crosstalk : -50dB (typ.) * between switches @ fIS=0.9MHz, RL=1kΩ * Frequency response, switch ”ON” : 40MHz (typ.) |
3.0V ~ 5.0V | 2uA(Max) | DIP-14 SOP-14 TSSOP-14 | |
| 700mW/500mW | 10V | 10V | |||
| 240Ω(Max) | 10Ω(typ) | ||||
| UCD4066 |
Quad Bilateral Switch * 15V Digital or ±7.5V Peak-to-Peak Switching * 85-Ω Typical On-State Resistance for 15V Operation * High noise immunity 0.45 VDD (typ.) * Matched “ON” resistance ΔRON=5Ω (typ.) over 15V signal input * High degree linearity 0.1% distortion (typ.) @ fIS=1kHz, VIS=5VP-P, VDD-VSS=5V, RL=10kΩ * Extremely low “OFF” 0.1nA (typ.) switch leakage: @ VDD-VSS=10V, TA=25°C * Extremely high control input impedance 1012Ω (typ.) * Frequency response, switch “ON” 40 MHz (typ.) |
3.0V ~ 5.0V | 4uA(Max) | DIP-14 | |
| 700mW | 10V | 10V | |||
| 240Ω(Max) | 10Ω(typ) | ||||
| 4051 |
8-CH Analog Multiplexers/Demultiplexers * Wide Analog Voltage Range: VDD–VEE = 3V~18V. (Note: VEE must be≦VSS) * Break-Before-Make Switching Eliminates Channel Overlap. * Linearized Transfer Characteristics * Implement an SP8T solid state switch effectively. * Pin–to–Pin Replacement for CD4051 |
3.0V~18.0V | 10uA(Max) | DIP-16 SOP-16 TSSOP-16 | |
| 500mW | 15V | 15V | |||
| 280Ω(Max) | 45Ω(Max) | ||||
| 4052 |
Differential 4-CH Analog Multiplexers/Demultiplexers * Wide Analog Voltage Range: VDD–VEE = 3V~18V. (Note: VEE must be≦VSS) * Break-Before-Make Switching Eliminates Channel Overlap. * Linearized Transfer Characteristics * Implement an DP4T Switch Effectively. * Pin to Pin Replacement for CD4052 |
3.0V~18.0V | 10uA(Max) | DIP-16 SOP-16 TSSOP-16 | |
| 750mW | 10V | 10V | |||
| 500Ω(Max) | 50Ω(Max) | ||||
| 4053 |
Triple 2-CH Analog Multiplexers/Demultiplexers * Wide Analog Voltage Range: VDD-VEE = 3V~18V. (Note: VEE must be≦VSS) * Break-Before-Make Switching Eliminates Channel Overlap. * Linearized Transfer Characteristics * Implement an SPDT Switch Effectively. * Pin to Pin Replacement for CD4053 |
3.0V~18.0V | 20uA(Max) | DIP-16 SOP-16 TSSOP-16 | |
| 500mW | 10V | 10V | |||
| 500Ω(Max) | 50Ω(Max) | ||||
| U74HC4051 |
8-CH Analog Multiplexers/Demultiplexers * Wide analog input voltage range from -5V to +5V * Low ON-state resistance * Logic level translation: to enable 5V logic to communicate with ±5V analog signals * Typical “break before make” built in |
2.0V~10.0V | 16uA(Max) | DIP-16 SOP-16 TSSOP-16 | |
| 750 mW/500mW/500mW | 4.5V | -4.5V | |||
| RAIL = 105Ω(Max) | 6Ω(typ) | ||||
| PEAK = 130Ω(Max) | |||||
| U74HC4052 |
Dual 4-CH Analog Multiplexers/Demultiplexers * Wide analog input voltage range from -5V to +5V * Low on-resistance * Logic level translation: to enable 5V logic to communicate with ±5V analog signals * Typical “break before make” built in |
2.0V~10.0V | 160uA(Max) | DIP-16 SOP-16 TSSOP-16 | |
| 500mW | 4.5V | -4.5V | |||
| RAIL = 130Ω(Max) | 6Ω(typ) | ||||
| PEAK = 165Ω(Max) | |||||
| U74HC4053 |
Triple 2-CH Analog Multiplexers/Demultiplexers * Wide analog input voltage range from -5V to +5V * Low ON-state resistance * Logic level translation: to enable 5V logic to communicate with ±5V analog signals * Typical “break before make” built in |
2.0V~10.0V | 16uA(Max) | DIP-16 SOP-16 TSSOP-16 | |
| 750 mW/500mW | 4.5V | -4.5V | |||
| RAIL = 120Ω(Max) | 6Ω(typ) | ||||
| PEAK = 130Ω(Max) | |||||
| U74HC4067* | 16-CH Analog Multiplexers/Demultiplexers | 2.0V~6.0V | 8uA(Max) | SOP-24 | |
| 500mW | 4.5V | -4.5V | |||
| RAIL = 160Ω(Max) | |||||
| U74LV4052 |
Dual 4-CH Analog Multiplexers/Demultiplexers * 2-V to 5.5-V VCC Operation * Fast Switching * High On-Off Output-Voltage Ratio * Low Crosstalk Between Switches * Extremely Low Input Current |
2.0~5.5V | 20uA(Max) | DIP-16 SOP-16 TSSOP-16 | |
| 500mW | 4.5V | 4.5V | |||
| RAIL = 75Ω(Max) | 15Ω(Max) | ||||
| PEAK = 100Ω(Max) | - | ||||
| U74LVX4051 |
8-CH Analog Multiplexers/Demultiplexers * Low ON resistance: RON=22Ω(Typ.)(VCC-VEE=3V) * RON=15Ω(Typ.)(VCC-VEE=6V) * High Speed: tpd=3ns (Typ.)(VCC=3V) * Low power Dissipation: ICC=4μA (Max.)(TA=25°C) * Input level: VIL=0.8V(Max.)(VCC=3V) VIH=2.0V(Min.)(VCC=3V) * Power down protection is provided on all control inputs * Pin and function compatible with U74HC4051 |
2.0~6.0V or ±3V | 8uA(Max) | DIP-16 SOP-16 TSSOP-16 | |
| 450mW/500mW | 3V | -3V | |||
| RAIL = 26Ω(Max) | 24Ω(Max) | ||||
| U74LVX4052 |
Dual 4-CH Analog Multiplexers/Demultiplexers * Low ON resistance: RON=22Ω(Typ.)(VCC-VEE=3V) * RON=15Ω(Typ.)(VCC-VEE=6V) * High Speed: tpd=3ns (Typ.)(VCC=3V) * Low power Dissipation: ICC=4μA (Max.)(TA=25°C) * Input level: VIL=0.8V(Max.)(VCC=3V) VIH=2.0V(Min.)(VCC=3V) * Power down protection is provided on all control inputs * Pin and function compatible with U74HC4052 |
2.0~6.0V or ±3V | 8uA(Max) |
DIP-16 SOP-16 TSSOP-16 QFN-16(3X3) |
|
| 450mW/500mW | 3V | -3V | |||
| RAIL = 26Ω(Max) | 24Ω(Max) | ||||
| U74LVX4053 |
Triple 2-CH Analog Multiplexers/Demultiplexers * Low ON resistance: RON=22Ω(Typ.)(VCC-VEE=3V) * RON=15Ω(Typ.)(VCC-VEE=6V) * High Speed: tpd=3ns (Typ.)(VCC=3V) * Low power Dissipation: ICC=4μA (Max.)(TA=25°C) * Input level: VIL=0.8V(Max.)(VCC=3V) VIH=2.0V(Min.)(VCC=3V) * Power down protection is provided on all control inputs * Pin and function compatible with U74HC4053 |
2.0~6.0V or ±3V | 8uA(Max) | DIP-16 SOP-16 TSSOP-16 | |
| 450mW | 3V | -3V | |||
| RAIL = 26Ω(Max) | 10Ω(Max) | ||||
| U74CBT3251 |
1 OF 8 FET Multiplexers/Demultiplexers * VCC Operating Range From 4V to 5.5V * Bidirectional Data Flow, With minimal Propagation Delay * Low ON-State Resistance (RON) Characteristics (RON =5Ω Typ.) * Low Power Consumption ICC=3μA (Max) |
4.0V~5.5V | 3uA(Max) | DIP-16 SOP-16 TSSOP-16 | |
| - | 4.5V | 0V | |||
| RAIL = 15Ω(Max) | - | ||||
| U74CBT3253 |
Dual 1 OF 4 FET Multiplexers/Demultiplexers * VCC Operating Range From 4V to 5.5V * Bidirectional Data Flow, With minimal Propagation Delay * Low ON-State Resistance (RON) Characteristics (RON =5Ω Typ.) * Low Power Consumption ICC =3μA (Max) |
4.0V~5.5V | 3uA(Max) | SSOP-16 | |
| - | 4.5V | 0V | |||
| RAIL = 7Ω(Max) | - | ||||
| U74CBT3257C |
4-Bit 1-of-2 FET Multiplexers/Demultiplexers *Undershoot Protection for Off-Isolation on A and B Ports Up to -2V *VCC Operating Range From 4V to 5.5V *Bidirectional Data Flow, With Near-Zero Propagation Delay *Low ON-State Resistance (RON) Characteristics (RON =3Ω Typ.) *Low Power Consumption ICC =3μA (Max) *Data and Control Inputs Provide Undershoot Clamp Diodes *Data I/Os Support 0 to 5-V Signaling Levels (0.8V, 1.2V, 1.5V, 1.8V, 2.5V, 3.3V, 5V) *Control Inputs Can be Driven by TTL or 5V/3.3V CMOS Outputs *IOFF Supports Partial-Power-Down Mode Operation *Supports I2C Bus Expansion |
4.0V~5.5V | 3uA(Max) | SSOP-16 TSSOP-16 | |
| - | 4.5V | 0V | |||
| RAIL = 6Ω(Max) | - | ||||
| U74CBT3126 |
Quadruple FET Bus Switch * 5 Ω switch connection between two ports * Max tpd of 0.25 ns at 5V * Low power consumption, ICC = 3 μA (Max.) at 5.5V * TTL compatible input levels |
4.0V~5.5V | 3uA(Max) | DIP-14 SOP-14 TSSOP-14 | |
| 600mW/500mW | 4.5V | 0V | |||
| RAIL = 15Ω(Max) | - | ||||
| U74CBTLV3125 |
Low-Voltage Quadruple FET Bus Switch * 5-Ω Switch Connection Between Two Ports * Standard ‘125-Type Pinout * Isolation Under Power-Off Conditions |
2.3V~3.6V | 10uA(Max) | DIP-14 SOP-14 TSSOP-14 | |
| - | 3V | 0V | |||
| RAIL = 7Ω(Max) | - | ||||
| U74CBTLV3126 |
Low-Voltage Quadruple FET Bus Switch * 5-Ω Switch Connection Between Two Ports * Standard ‘126-Type Pinout * Ioff Supports Partial-Power-Down Mode Operation |
2.3V~3.6V | 10uA(Max) | SSOP-16 TSSOP-14 | |
| - | 3V | 0V | |||
| RAIL = 7Ω(Max) | - | ||||
| U74CBT1G125 |
Single FET Bus Switch * 5-Ω Switch Connection Between Two Ports * Inputs are TTL-Voltage compatible |
4.0V~5.5V | 1uA(Max) | SOT-25 SOT-23-5 SOT-353 | |
| - | 4.5V | 0V | |||
| RAIL = 7Ω(Max) | - | ||||
| U74CBT1G384 |
Single FET Bus Switch * 5-Ω Switch Connection Between Two Ports * Inputs are TTL-Voltage compatible |
4.0V~5.5V | 1uA(Max) | SOT-25 SOT-23-5 SOT-353 | |
| - | 4.5V | 0V | |||
| RAIL = 7Ω(Max) | - | ||||
| U74CBT1G385 |
Single FET Bus Switch * 5-Ω Switch Connection Between Two Ports * TTL-compatible Control Input Levels * Packaged in Plastic Small-Outline Transistor Packages |
4.0V~5.5V | 1uA(Max) | SOT-25 SOT-23-5 SOT-353 | |
| - | 4.5V | 0V | |||
| RAIL = 7Ω(Max) | - | ||||
| U74CBT2G125 |
Dual FET Bus Switch with Level Shift * Operating voltage: VCC=4.0~5.5V * High speed operation: tPD=0.32 ns (max) * Ultra-low on resistance: RON=5Ω (typ.) * TTL level input (control input) * Low Power Dissipation: ICC=10μA (max.) |
4.0V~5.5V | 10uA(Max) | SOP-8 TSSOP-8 | |
| - | 4.5V | 0V | |||
| RAIL = 9Ω(Max) | - | ||||
| U74CBT3306 |
Dual FET Bus Switch * 5-Ω Switch Connection Between Two Ports * TTL-Compatible Input Levels |
4.0V~5.5V | 3uA(Max) | SOP-8 TSSOP-8 | |
| - | 4.5V | 0V | |||
| 7Ω(Max) | - | ||||
| US5C3125* | - | - | - | TSSOP-14 | |
| - | - | - | |||
| - | - | ||||
| US5C3305 |
2-Bit Bus Switch with Individual Enables * Low on-resistor between two ports (5Ω typical) * Near-Zero propagation delay * Direct bus connection when switches are ON * Ultra Low Quiescent Power (0.2μA typical) - Ideally suited for notebook applications |
4.0V~5.5V | 1uA(Max) | MSOP-8 | |
| 350mW | 4.5V | 0V | |||
| 7Ω(Max) | - | ||||
| US5C3306 |
2-Bit Bus Switch with Active Low Enables * Low on-resistor between two ports (5Ω typical) * Near-Zero propagation delay * Direct bus connection when switches are ON * Ultra Low Quiescent Power (0.2μA typical) - Ideally suited for notebook applications |
4.0V~5.5V | 3uA(Max) | MSOP-8 | |
| 350mW | 4.5V | 0V | |||
| 7Ω(Max) | - | ||||
| US5C3309 |
3:1 MUX / DEMUX Bus Switch * Low on-resistor connection between input and output (5Ω typical) * Near-Zero propagation delay * Direct bus connection when switches are ON * Ultra Low Quiescent Power (0.2μA typical) - Ideally suited for notebook applications |
4.75V~5.25V | 3uA(Max) | MSOP-8 SOP-8 | |
| 350mW/500mW | 5V | 0V | |||
| 7Ω(Max) | - | ||||
| U74HC148 |
8-Line TO 3-Line Priority Encoders * Wide supply voltage range from 2.0V to 6.0V * Low static power consumption; ICC=8μA (Max.) * Encode Eight Data Lines to 3-Line Binary (Octal) * High Noise Immunity |
2 V~ 6 V | 8uA(Max) | SOP-16 TSSOP-16 | |
| - | - | - | |||
| - | - | ||||
|
|
|||||
