首页 > 产品中心
| Operational Amplifier | ||||||
| Single Operational Amplifier | ||||||
| Part No. | Features |
Number of Channels |
VCC | VOS(mV) | Slew Rate(V/us) | Package |
| Bandwidth | Max | Typ | ||||
| M2107 |
Single Operational Amplifier *Operating Voltage (V+/V- =±1.0V to±3.5V) *Low Output Saturation: (4Vp-p at single 5V supply) *V- Shield Plate Between +Input and -Input *Suitable Pin Arrangement for Application *Bipolar Technology |
1 | ±1.0V ~ ±3.5V or 7.0V | 6 | 3 | SOT-25 |
| - | ||||||
| M2136 |
Ultra Wide Band, High Slew Rate Single Operational Amplifier *Input Offset Voltage Balance *Operating Voltage: ±1.35V ~ ±6V *Uitra Wide Band: 200MHz Typ. *High Slew Rate: 45V/μs Typ. *Low Operating Current: 0.63mA Typ. |
1 | ±1.35V ~ ±6V | 45 | 5 | SOP-8 TSSOP-8 |
| 200MHz | ||||||
| M2110 |
Monaural MIC Amplifier *Operating voltage: 2.7V~5.3V *Low operating current: V+=5V, 3.5mA (Typ,) V+=3.3V, 1.1mA (Typ.) *Short circuit protection for external MIC. |
1 | 2.7V ~ 5.3V | - | - | SOP-8 TSSOP-8 |
| - | ||||||
| M2125 |
Single-Supply Operational Amplifier * Single-Supply Operation * Low Operating Voltage: ±2.7V~20V * Low Operating Current: 1.0mA (typ.) * Slew Rate: 1.2V/μs (typ.) |
1 | ±2.7V ~ 20.0V | 7 | 1.2 | SOT-25 SOT-353 |
| 1.2MHz | ||||||
| LM318 |
High-Speed Single Operational Amplifier * Unit gain stable (internal frequency compensation) * 4mV typical input offset voltage * 30nA typical input offset current * Input bias current of 250nA (maximum) * 15MHz bandwidth (small signal) * 50V/μs slew rate (guarantee) * Operates voltages of ±5V to ±20V * Overload protection for Input and output * Same pin assignment as general-purpose op amps |
1 | ±5.0V ~ ±20.0V | 10 | 70 | DIP-8 SOP-8 |
| 15MHz | ||||||
| LM321 |
Low Power Single Operational Amplifier * Low supply current 430μA * VCC=5V, TA=25°C. Typical values unless specified. * Gain-Bandwidth product 1MHz * Low input bias current 45nA * Wide supply voltage range +3V~+32V * Stable with high capacitive loads |
1 | ±2.5V ~ ±16.0V | 7 | 0.4 | SOT-23-5 |
| 1MHz | ||||||
| TS321 |
* Wide Power-Supply Range Single Supply: 3V~30V or Dual Supply: ±1.5V~±15V * Large Output Voltage Swing: 0V~3.5V (Min.) (VCC=5V) * Low Supply Current: 500μA (Typ.) * Low Input Bias Current: 20nA (Typ.) * Low Input Offset Voltage: 4mV (Max.) * Stable With High Capacitive Loads |
1 |
Single Supply: 3V~30V Dual Supply: ±1.5V~±15V |
4 | 0.4 | SOT-25 |
| 595mW | ||||||
| LM741 | General-Purpose Single Operational Amplifier | 1 | ±2.0V ~ ±22.0V | DIP-8 SOP-8 | ||
| 1MHz | ||||||
| ULV7011 |
* CMOS Technology * Wide Operating Voltage (VDD=1~5.5V) * Wide Output Swing Range (VOM=2.9V min. @ 3.0V) * Low Operating Current * Slew Rate (0.15V/μs typ.) * Unity Gain Bandwidth (0.4MHz typ.) * Internal Compensation Capacito |
1 | 1~5.5V | 10 | 0.15 | SOT-25 |
| 0.4MHz | ||||||
| ULV7012 |
* CMOS Technology * Wide Operating Voltage (VDD=1~5.5V) * Wide Output Swing Range (VOM=2.9V min. @ 3.0V) * Low Operating Current * Slew Rate (1.5V/μs typ.) * Unity Gain Bandwidth (1.2MHz typ.) * Internal Compensation Capacitor |
1 | 1~5.5V | 10 | 1.5 | SOT-25 |
| 1.2MHz | ||||||
| ULV7013 |
* CMOS Technology * Wide Operating Voltage (VDD=1~5.5V) * Wide Output Swing Range (VOM=2.9V min. @ 3.0V) * Low Operating Current * Slew Rate (2.5V/μs typ.) * Unity Gain Bandwidth (1.8MHz typ.) * Internal Compensation Capacitor |
1 | 1~5.5V | 10 | 2.5 | SOT-25 |
| 1.8MHz | ||||||
|
|
Dual Operational Amplifier
Part No.
Features
Number of
Channels
VCC
VOS(mV)
Slew Rate(V/us)
Package
Bandwidth
Max
Typ
M2100
Dual Operational Amplifier
* Single Supply Operation
* Operating Voltage (±1.0V~±3.5V)
* Low Saturation Output Voltage
* High Slew Rate (4V/μs typ.)
* Bipolar Technology
2
±1.0V ~ ±3.5V or 7.0V
6
4
DIP-8 SOP-8 TSSOP-8
12MHz
M2115
Dual Operational Amplifier
* Operating Voltage: ±1V ~±7V
* Low Saturation Output Voltage: ±2.0Vp-p@V+=±2.5V
* Slew Rate: 4V/μs (typ.)
* Unity Gain Bandwidth: 12MHz (typ.)
2
±1.0V ~ ±7.0V
6
4
DIP-8 SOP-8 TSSOP-8
12MHz
M2137
Ultra Wide Band, High Slew Rate Operational Amplifier
±1.35V ~ ±6.75V
DIP-8 SOP-8 TSSOP-8
200MHz
3308
Dual High Current Operational Amplifier
*Single Supply
*Operating Voltage (+3V~+15V) (±1.5V~±7.5V)
*High Output Current (150mA)
*High Frequency Noise Rejection
*Internal Enhanced Frequency Compensation
2
±1.5V ~ ±7.5V or 3.0V ~ 15.0V
5
1
DIP-8 SOP-8 TSSOP-8
1.3MHz
3414
Dual High Current Operational Amplifier
* Single supply
* Operating voltage: 3V~15V
* High output current: 70Ma
* Slew rate: 10V/μA(Typ.)
* Bipolar technology
2
±1.5V ~ ±7.5V or 3.0V~ 15.0V
5
1
DIP-8 SOP-8 TSSOP-8
1.3MHz
MC4556
Dual High Current Operational Amplifier
* Operating Voltage (±2V~±18V)
* High Output Current (IOUT=70mA)
* Slew Rate (3V / ms typ.)
* Gain Band Width Product (8MHz typ.)
* Bipolar Technology
2
±2.0V ~ ±18.0V
6
3
DIP-8 SOP-8
8MHz
MC4580
Dual Operational Amplifier
*Operating voltage (±2V ~ ±18V)
*Low input noise voltage (0.8μVrms typ.)
*Wide gain bandwidth product (15MHz typ.)
*Low distortion (0.0005% typ.)
*Slew rate (5V/μs typ.)
*Bipolar technology
2
±2.0V ~ ±18.0V
3
5
DIP-8 SOP-8 TSSOP-8
MSOP-8 DFN2030-8 SIP-8
15MHz
UC27L2
High Input Independence,High Gain,Low Frequency, Extremely Low
Power,Single Supply Dual Operational Amplifier
3.0V ~ 16.0V
DIP-8 SOP-8
110KHz
MC33078
DUAL LOW NOISE OPERATIONAL AMPLIFIERS
* Dual supply operation from: ±5.0 V to ±18 V
* Low input offset voltage: 0.15mV
* Large output voltage swing: +14.1V/ -14.6V
* High slew rate: 7.0V/μs
* Low voltage noise: 4.5nV/ Hz
* Low total harmonic distortion: 0.002%
* High gain bandwidth product: 16MHz
* High open loop AC gain: 800 @ 20kHz
2
±5.0 V to ±18 V
2
7
SOP-8
16MHz
MC33178
HIGH OUTPUT CURRENT LOW NOISE, LOW POWER OPERATIONAL AMPLIFIERS
* Dual supply operation from ±2V to ±18V
* High slew rate: 2.0V/μs
* Large output voltage swing
* 600Ω output drive capability
* Low offset voltage: 0.15mV (Mean)
* Low total harmonic distortion: 0.0024% (@ 1.0 kHz w/600Ω load)
* High gain bandwidth: 5.0MHz
2
±2V to ±18V
3
2
DIP-8 SOP-8
5MHz
MC33272
SINGLE SUPPLY, HIGH SLEW RATE ,LOW INPUT OFFSET
VOLTAGE OPERATIONAL AMPLIFIERS
* Single (or dual) supply operation from +3 V to +36V
(±1.5V~±18V)
* Large output voltage swing: +14.1V/-14.6V
* Input offset voltage trimmed to 100μV (Typ)
* Very low input bias current: 300nA
* Very low input offset current: 3.0nA
* High input resistance: 16MΩ
* High slew rate: 10V/μs
* High gain bandwidth product: 24MHz @ 100kHz
* Low total harmonic distortion: 0.003%
* Power supply drain current: 2.15mA per amplifier
* Low noise: 18nV / Hz @ 1.0kHz
2
+3 V to +36V
1
10
SOP-8
24MHz
3422
High Performance Dual Operational Amplifier
* Single Supply Operation: 3V ~ 36V
* Dual Supply Operation: ±1.5V ~ ±18V
* High Gain Bandwidth Product: 25MHz
* High Slew Rate: 15V/μs
* Low Voltage Noise: 14nV/√Hz
* No Phase Inversion
* ESD Tolerance: 2KV
* Latch-Up Immunity
2
±1.5V ~ ±18.0V or 3.0V ~ 36.0V
2.5
15
DIP-8 SOP-8 DFN3030-8
25MHz
LM358
Low Power Dual Operational Amplifier
*Internally frequency compensated for unity gain.
*Wide power supply range 3V - 32V.
*Input common-mode voltage range include ground.
*Large DC voltage gain.
2
±1.5V ~ ±16.0V or 3.0V ~ 32.0V
5
-
DIP-8 SOP-8 SIP-9
MSOP-8 TSSOP-8 DFN2020-8
-
M2904
Low Power Dual Operational Amplifier
*Single Supply
*Operating Voltage: +3V~+32V
*Low Operating Current: 0.7mA (typ.)
*Slew Rate: 0.5V/μs (typ.)
2
±1.5V ~ ±16.0V or 3.0V ~ 32.0V
7
0.5
DIP-8 SOP-8 TSSOP-8
MSOP-8
0.2MHz
MC34072
High Slew Rate, Wide Bandwidth,Dual Operational Amplifier
* Wide bandwidth: 4.5 MHz
* High slew rate: 13V/μs
* Fast settling time:1.1μs to 0.1%
* Wide single supply operation: 3.0V to 44V
* Wide input common mode voltage range:
Includes ground (VEE)
* Low input offset voltage: 3.0mV maximum
* Large output voltage swing: -14.7V to +14V
(with +-15V supplies)
* Large capacitance drive Capability: 0pF to 10,000 pF
* Low total harmonic distortion: 0.02%
* Excellent phase margin: 60°
* Excellent gain margin: 12dB
* Output short circuit protection
2
±1.5V ~ ±22.0V or 3.0V ~ 44.0V
3
10
DIP-8 SOP-8 TSSOP-8
MSOP-8
4.5MHz
UMC33172
High Slew Rate, Wide Bandwidth,Single Supply Operational Amplifier
±1.5V ~ ±22.0V or 3.0V ~ 44V
DIP-8 SOP-8 TSSOP-8
MSOP-8
1.8MHz
USA5532
Dual Low-Noise Operational Amplifier
±3.0V ~ ±20.0V
DIP-8 SOP-8 TSSOP-8
MSOP-8
10MHz
3404
Dual Operational Amplifier
*Single Supply
*Operating Voltage: +4v~+36v
*Low Operating Current: 2.0mA (Typ.)
*Slew Rate: 1.2v/ms (typ.)
2
±2.0V ~ ±18.0V or 4.0V ~ 36.0V
5
1.2
DIP-8 SOP-8 TSSOP-8
1.2MHz
M4565
Dual Operational Amplifier.
* Operating Voltage: ±4V~±18V
* Wide Gain Bandwidth Product: 4MHz (typ.)
* Slew Rate: 4V/μs (typ.)
2
±4.0V ~ ±18.0V
3
4
DIP-8 SOP-8 TSSOP-8
10MHz
MC4560
Dual Operational Amplifier
*Operating Voltage (±4V~±18V)
*Wide Gain Bandwidth Product. (10MHz typ.)
*Slew Rate (4V / μs typ.)
*Bipolar Technology
2
±4.0V ~ ±18.0V
6
4
DIP-8 SOP-8 MSOP-8
10MHz
MC1458
Dual Operational Amplifier
* Low power consumption
* Wide input voltage range
* No latch-up
* High gain
* Short-circuit protection
* Frequency compensation is unnecessary
2
±22.0V
5
0.8
DIP-8 SOP-8
1MHz
MC4558
Dual Wide Bandwidth Operational Amplifier
* No frequency compensation required
* No latch-up
* Large common mode and differential voltage range
* Parameter tracking over temperature range
* Gain and phase match between amplifiers
* Internally frequency compensated
* Low noise input transistors
2
±22.0V
6
2.2
DIP-8 SOP-8 TSSOP-8
SIP-8 SIP-9 MSOP-8
2.8MHz
LM833
Low Noise Dual Operational Amplifier
* High slew rate: 7V/μs
* High gain bandwidth product: 15MHz
* Excellent frequency stability
* Low distortion: 0.002%
* Low voltage noise: 4.5nV/√Hz
2
±2.5V ~ ±15.0V or 5.0V~ 30.0V
5
7
SOP-8
15MHz
Quad Operational Amplifier
Part No.
Features
Number of
Channels
VCC
VOS(mV)
Slew Rate(V/us)
Package
Bandwidth
Max
Typ
LM224
Quad Operational Amplifier
* Wide Supply Voltage Range. (Single Supply: 3~30V)
* Low Supply Current Drain Independent of Supply Voltage: 0.8 mA
Typ
* Large DC voltage gain: 100dB
* Input Common-Mode Voltage Range Includes Ground.
* Low Input Bias and Offset Parameters
* Differential Input Voltage Range Equal to Maximum Rated Supply
Voltage: 32V
* Open-Loop Differential Voltage Amplification: 100 V/mV Typ
* Internal Frequency Compensation for Unity Gain
4
3.0V ~ 30.0V
5
-
DIP-14 SOP-14 TSSOP-14
-
LM324
Low Power Quad Operational Amplifier
*Internally frequency compensated for unity gain.
*Large DC voltage gain :100dB.
*Wide operating supply range (Vcc=3V~40V).
*Input common-mode voltage includes ground.
*Large output voltage swing: From 0V to Vcc-1.5V.
*Power drain suitable for battery operation.
4
3.0V ~ 40.0V or ±20.0V
5
-
DIP-14 SOP-14 TSSOP-14
-
MC34074
High Slew Rate, Wide Bandwidth, Quad Operational Amplifier
* Wide bandwidth: 4.5MHz
* High slew rate: 13V/μs
* Fast settling time:1.1μs to 0.1%
* Wide single supply operation: 3.0V to 44V
* Wide input common mode voltage range:
* Includes Ground (VEE)
* Low input offset voltage: 3.0mV maximum
* Large output voltage swing: -14.7V to +14V
(with +-15V supplies)
* Large Capacitance Drive Capability: 0pF to 10,000pF
* Low total harmonic distortion: 0.02%
* Excellent phase margin: 60°
* Excellent gain margin: 12dB
* Output short circuit protection
* ESD Diodes/Clamps provide input protection
4
3.0V ~ 44.0V or ±22.0V
5
-
DIP-14 SOP-14
4.5MHz
Dual Operational Amplifier with JFET Input
Quad Operational Amplifier with JFET Input
Low Voltage Rail to Rail Output Single Operational Amplifier
Part No.
Features
Number of
Channels
VCC
VOS(mV)
Slew Rate(V/us)
Package
Bandwidth
Max
Typ
TL062
Low Power Dual J-FET Operational Amplifier
* Very low power consumption
* Wide common-mode (up to VCC+ ) and differential voltage range
* Low input bias and offset current
* Output short-circuit protection
* High input impedance J-FET input stage
* Internal frequency compensation
* Latch up free operation
* Typical supply current: 400μA
2
±18.0V
15
1.1
DIP-8 SOP-8
1MHz
TL072
Low Noise Dual J-FET Operational Amplifier
*Low power consumption
*Wide common-mode (up to VCC+ ) and differential voltage range
*Low input bias and offset current
*Low noise en = 15nV / Hz (typ)
*Output short-circuit protection
*High input impedance J-FET input stage
*Low harmonic distortion:0.01%(typ)
*Internal frequency compensation
*Latch up free operation
*High slewrate:16V/ms(typ)
2
±18.0V
10
16
DIP-8 SOP-8 TSSOP-8
4MHz
TL082
General Purpose Dual J-FET Operational Amplifier
* Low input bias and offset current
* Wide common-mode (up to VCC
+ ) and differential voltage range
* Output short-circuit protection
* High input impedance J-FET input stage
* Internal frequency compensation
* Latch up free operation
* High slewrate:16V/μs(typ.)
2
±18.0V
10
16
DIP-8 SOP-8 TSSOP-8
4MHz
Low Voltage Rail to Rail Output Dual Operational Amplifier
Part No.
Features
Number of
Channels
VCC
VOS(mV)
Slew Rate(V/us)
Package
Bandwidth
Max
Typ
TL074
Low Noise Quad J-FET Operational Amplifier
*Low power consumption
*Wide common-mode (up to Vcc+ ) and differential voltage
range
*Low input bias and offset current
*Low noise eN = 15nV / Ö Hz(typ)
*Output short-circuit protection
*High input impedance J-FET input stage
*Low harmonic distortion:0.01%(typ)
*Internal frequency compensation
*Latch up free operation
*High slewrate:13V/μs(typ)
4
±18.0V
6
13
DIP-14 SOP-14
3MHz
TL084
Low Noise Quad J-FET Operational Amplifier
*Low Power Consumption
*Wide Common-Mode (Up To Vcc+) and Differential Voltage Range
*Low Input Bias and Offset Current
*Low Noise eN = 15 (typ)
*Output Short-Circuit Protection
*High Input Impedance J-FET Input Stage
*Low Harmonic Distortion: 0.01%(typ)
*Internal Frequency Compensation
*Latch up Free Operation
4
±18.0V
16
-
DIP-14 SOP-14 TSOP-14
1MHz
Part No.
Features
Number of
Channels
VCC
VOS(mV)
Slew Rate(V/us)
Package
Bandwidth
Max
Typ
LV721
Low Voltage Rail to Rail Output Operational Amplifier
1
2.2V~5.5V
SOT-25
10MHz
LV821
Low Voltage Rail to Rail Output Operational Amplifier
1
2.5V~5.5V
SOT-25
5MHz
LV321
Low Voltage Rail to Rail Output Operational Amplifier
* 2.7V and 5V Performance Guaranteed
* No Crossover Distortion
* 130μA Low Supply Current
* Rail-to-Rail Output Swing @10kΩ Load: V+ -10mV
V- +65mV
* VCM From -0.2V to V+ -0.8V
1
2.7V~5.5V
7
0.8
SOT-25 SOT-353
1MHz
LLV321
Low Voltage Rail to Rail Output Operational Amplifier
* Input Voltage Varies From -0.25V to +1.5V
* Supply Current: 80μA
* Output Voltage Varies from 0.01V to 2.69V
* Gain Bandwidth: 1.2MHz
* Slew Rate: 1.5V/μs
* Fully Specified at +2.7V and +5V Supplies
* Operating Temperature Range: -40°C ~ +125°C
* Halogen Free
1
2.7V~5.5V
7
1.5
SOT-353
1.2MHz
LV2460/2461
FAMILY OF LOW-POWER RAIL-TO-RAIL INPUT/OUTPUT OPERATIONAL AMPLIFIERS
* Rail-to-Rail Output Swing
* Gain Bandwidth Product: 6.4 MHz
* ±80mA Output Drive Capability
* Supply Current: 500μA
* Input Offset Voltage: 100μV
* Input Noise Voltage: 11nV/√Hz
* Slew Rate: 1.6V/μs
* Universal Operational Amplifier
1
2.7V~6.0V
7
1.6
SOT-25 SOT-26
6.4MHz
PA3211
Rail to Rail Output and High Slew Rate OP AMP
* Single-Supply Operation: +3V ~ +5.5V
* Input / Output Rail-to-Rail
* Low Quiescent Current: 500μA @ 5V
* With Low Input Current
* 5.23V/μs High Slew Rate
* High Output Driving Capacity
* 6.5MHz High Gain-Bandwidth Product
* 70dB High PSRR
1
3.0V~5.5V
10
5.2
SOT-25
6.5MHz
Part No.
Features
Number of
Channels
VCC
VOS(mV)
Slew Rate(V/us)
Package
Bandwidth
Max
Typ
OPA2336
Single-Supply Micropower CMOS Operational Amplifier
* Operating on a Single-Supply
* Rail-to-Rail Output (Accuracy: ± 3mv)
* Low Power Dissipation: IQ=20μA/Amplifier
* Low Offset Voltage up to 125μV (MAX.)
* Power Supply Specified from 2.3V to 5.5V
* Halogen Free
2
2.3V~5.5V
0.125
0.03
SOP-8
100KHz
LV2622
Low Voltage Rail to Rail Output Operational Amplifier
* Low Cost
* Rail-to-Rail Output Swing
* Input Rail: - 0.1V~+5.6V with VS=5.5V
* Typical VOS: 0.7mV
* Gain-Bandwidth Product: 3MHz
* High Slew Rate: 1.7V/μs
* Settling Time to 0.1% with 2V Step: 2.1μs
* Overload Recovery Time: 1μs
* Low Noise Voltage: 12nV/ Hz
* Operates on 2.5V~5.5V Supplies
* Low Power: 250μA/Amplifier Typical Supply Current
2
2.5V ~ 5.5V
3
1.7
SOP-8 MSOP-8 TSSOP-8
3MHz
LV358
Low Voltage Rail to Rail Output Operational Amplifier
* 2.7V and 5V Performance Guaranteed
* No Crossover Distortion
* 210μA Low Supply Current
* Rail-to-Rail Output Swing
@10kΩ Load V+ -10mV
V-+65mV
* VCM From -0.2V to V+ -0.8V
2
2.7V ~ 5.5V
7
1
SOP-8 TSSOP-8 MSOP-8
DFN2030-8
1MHz
LV2462-LV2463
FAMILY OF LOW-POWER RAIL-TO-RAIL INPUT/OUTPUT OPERATIONAL AMPLIFIERS WITH SHUTDOWN
* Rail-to-Rail Output Swing
* Gain Bandwidth Product: 6.4 MHz
* ±48mA Output Drive Capability(VCC=5V)
* Supply Current: 500μA/channel
* Input Offset Voltage: 100μV
* Input Noise Voltage: 11nV/ Hz
* Slew Rate: 1.6V/μs
* Universal Operational Amplifier
* Micropower shutdown mode (LV2463)0.3μA/channel
2
2.7V ~ 6V
2
1.6
SOP-8 MSOP-8
MSOP-10
5.2MHz
ULV2362
* Low Supply-Voltage Operation: VCC=±1V (Min.)
* Wide Bandwidth: 7MHz (Typ.) at VCC=±2.5V
* High Slew Rate: 3V/μs (Typ.) at VCC=±2.5V
* Low Noise: 8nV/ Hz (Typ.) at f=1kHz
* Wide Output Voltage Swing: ±2.4V (Typ.) at VCC=±2.5V,
RL=10 kΩ
2
±1 ~ ±2.5
6
3
SOP-8
7MHz
ULV2772
FAMILY OF 2.7V HIGH-SLEW-RATE RAIL-TO-RAIL OUTPUT OPERATIONAL AMPLIFIERS
* Qualified for Automotive or Portable Applications
* High Slew Rate: 10.5V/μs Typ
* High-Gain Bandwidth: 5.1MHz Typ
* Supply Voltage Range from 2.5V ~ 5.5V
* Rail-to-Rail Output
* Input Offset Voltage: 360μV Typ
* Low Distortion Driving 600Ω: 0.005% THD+N
* Low Supply Current (Per Channel): 1mA
* 17nV/√Hz Input Noise Voltage
* 2pA Input Bias Current
* Characterized From TA=−40°C~125°C
2
2.5V~6V
2.7
10.5
TSSOP-8 SOP-8
5.1MHz
ULV8542
1.1MHz, 42μA RAIL-TO-RAIL I/O CMOS DUAL AMPS
* Low Cost
* Operating voltage range:2.1V~ 5.5V
* Low offset voltage:0.8mV Typical
* Very low input bias currents: 0.5pA
* Rail-to-Rail Input and Output
* Unity Gain Stable
* Gain Bandwidth Product: 1.1MHz
2
2.1V~5.5V
3.5
0.8
MSOP-8
1.1MHz
Low Voltage Rail to Rail Output Quad Operational Amplifier
Part No.
Features
Number of
Channels
VCC
VOS(mV)
Slew Rate(V/us)
Package
Bandwidth
Max
Typ
LV324
Low Voltage Rail to Rail Output Operational Amplifier
* 4-Channels Op amps
* Rail-to-Rail Output Swing
* Widely Input Common-Mode Voltage Range
* Low Voltage Operation
* Low Supply Current: Typ.=410μA @ V+ =5V, V-=0V
* Perfect AC characteristics:
GBW: Typ.=1MHz
SR: Typ.=1V/μs
φm: Typ.=60Deg
Gm: Typ.=10dB.
4
2.7V ~ 5.5V
7
1
SOP-14 TSSOP-14
1.2MHz
LV2464
FAMILY OF LOW-POWER RAIL-TO-RAIL INPUT/OUTPUT OPERATIONAL AMPLIFIERS
* Rail-to-Rail Output Swing
* ±80mA Output Drive Capability
* Gain Bandwidth Product: 6.4MHz
* Supply Current: 500μA/channel
* Input Offset Voltage: 100μV
* Input Noise Voltage: 11nV/√Hz
* Slew Rate: 1.6V/μs
4
2.7V~6.0V
7
1.6
SOP-14
6.4MHz
High Voltage Rail to Rail I/O Operational Amplifier
Part No.
Features
Number of
Channels
VCC
VOS(mV)
Slew Rate(V/us)
Package
Bandwidth
Max
Typ
LMH358
Low Power Rail to Rail Output Operational Amplifier
* Operates on 4.5V~16V supplies
* Input common voltage range beyond the rails
* Rail-to-Rail output voltage swing
* Low input offset voltage 3mV (Typical)
* High gain-bandwidth product 4MHz
* Low quiescent current: 500μA per amplifier
* Large DC voltage gain 100dB (Typical)
* High slew rate 1.3V/μs
* Unit-Gain stable
2
4.5V ~ 16V
10
1.3
SOP-8
4MHz
L6132
Low Power 10 MHz Rail-to-Rail Input/Output Dual OP,
with Wide Supply Range 2.7V to 24.0V
* 2.7V and 5V Performance Guaranteed
* No Crossover Distortion
* 210μA Low Supply Current
* Rail-to-Rail Output Swing
@10kΩ Load V+ -10mV
V－ +65mV
* VCM From -0.2V to V+ -0.8V
2
1.8V ~ 24.0V
6
1
SOP-8 DFN2020-8
10MHz
ULV271
Family of 500uA/Ch 3-MHz Rail-to-Rail Output Operational Amplifier
1
2.7V ~ 16.0V
SOT-25 SC59-5
3MHz
ULV2371
Family of 500uA/Ch 3-MHz Rail-to-Rail Output Operational Amplifier With Shutdown
1
2.7V ~ 16.0V
SOT-26 SC59-6
3MHz
ULV1546
20V HIGH CURRENT DRIVE RAIL-TO-RAIL VCOM/GAMMA
BUFFER
* Wide Supply Operation Range +5V~+20V
* Beyond the rails input capability
* Rail-to-rail output swing
* Low supply current, 1.2mA per amplifier (typical)
* Wide bandwidth (unit gain) 30MHz-3dB bandwidth
* 300mA peak output AC current (typ.)
* High slew rate=30V/μs
* Unity-gain stable
4
5V~+20V
15
27
TSSOP-14
28MHz
