首页 > 产品中心| Power Switch | ||||||||
| Parts No. | Features | VCC(Max) | PD(mW) | ICC | ISTBY | RON | IO(limit) | Package |
| US0653 | - | - | - | - | - | - | - | DIP-8 |
| US1802S | - | - | - | - | - | - | - | SOP-16 |
| US236 | - | - | - | - | - | - | - | SOP-8 |
| US253AD | - | - | - | - | - | - | - | SOT-26 SOP-8 |
| US2005 |
70mΩ, 0.5A High-Side Power Switches With Flag * Built-in 80mΩ N-MOSFET * Open-drain fault flag output to Indicate fault conditions * Input voltage varies from 2.5V to 5.5V * 80μA low quiescent current * Current limit values of 0.5A, 0.8A, and 1.2A * Automatic-on output after fault * Thermal protection * Under voltage lock-out (UVLO) |
2.5V~5.5V | 250mW | <300uA | <5uA | Typ=70mΩ | Typ=0.7A | SOT-26 |
| US3075-US3375 |
0.5A Power Distribution Switch * Operating on The Range of 3V to 5.5V * High-Side MOSFET with 100mΩ RDS(ON) (TYP.) * Quiescent Supply Current: 65μA * Available With 4 Versions of Current Limits with Foldback * Rise Time: 400μS (TYP.) * UVLO (Under Voltage Lockout) * Output Shutdown Pull-low Resister * Shutdown Supply Current: 1μA (MAX.) * Available with Active-Low / High Enable * Reverse Current is Not Generated when in Power Off State * Deglitched Open-Drain Over-Current Flag Output (OC ) *US3075:0.5A ; US3175:0.7A ; US3275:1.1A ; US3375:1.5A |
3.0V~5.5V | 470mW | Typ=65uA | <1uA | Typ=100mΩ | Typ=0.75A | SOP-8 MSOP-8 TSSOP-8 |
| US201/A/B/C |
0.6A High-Side Power Switches With Flag * 80mΩ(Typ) N-Channel MOSFET * Supply Current: – Switch On : 25μA(Typ) – Switch Off : 1μA (Typ) * Load Current 500mA for US201 and 1.0A for US201A/B/C Blank:0.6A,A:1.1A,B:1.3A,C:1.5A ; J:Active High L:Active Low * Input Voltage from 2V ~ 5.5V * In Off-State: Output Voltage can be Higher than Input |
2.0V~5.5V | 250mW | <45uA | <1uA | Typ=80mΩ | Typ=0.8A | SOT-25 |
| US107 |
2.2A POWER DISTRIBUTION SWITCH * Single power switch family * Operating range: 3.0V~5.5V * 130μA quiescent supply current * 1μA maximum shutdown supply current * 70mΩ high-side MOSFET * 1mS typical rise time * Under voltage lockout * Available with Active-Low / High Enable A:2.2A , B:1.7A , C:1.2A * No reverse current when power off * Available with or without output shutdown pull-low resister * Deglitched open-drain over-current flag output (OC ) * Output reverse-voltage protection |
3.0V~5.5V | 500mW | <190uA | <1uA | Typ=70mΩ | Typ=2.2A | SOT-25 |
| US203 |
80mΩ/90mΩ, 0.6A High-Side Power Switches With Flag * Input Voltage Varies From 3.5V to 5.5V * Built-in N-MOSFET * Output Can Be Forced Higher Than Input (Off-State) * Typical Low Supply Current: - Switch On: 25μA (TYP) - Switch Off: 0.1μA (TYP) * Open-Drain Fault Flag Output To Indicate Fault Conditions * Protection Circuits: - Soft-start( Hot plug-in application) - UVLO 1.7V (TYP.) - Current Limiting Protection - Thermal Shutdown Protection * Reverse Current Flow Blocking (No Body Diode) *AH:2.1A / Active High, AL:2.1A/Active Low BH:1.6A / Active High, BL:1.6A/Active Low CH:1.1A / Active High, CL:1.1A/Active Low DH:0.6A / Active High, DL:0.6A/Active Low |
3.5V~5.5V | 250/400mW | <45uA | <1uA | Typ=80mΩ/90mΩ | Typ=0.8A | SOT-25 SOP-8 |
| US202/A |
1.1A 100mΩ Power Distribution Switches * Input Voltage Varies From 2.2V to 6V * Guaranteed Continuous Current: 1.0A * High-Side NMOSFET: 85mΩ (TYP) * Soft Start * Current Limit:1.5A * Thermal Protection * Low Supply Current: 23μA * Available with Active-Low / High Enable |
2.2V~6.0V | 250mW | <45uA | <1uA | Typ=85mΩ | Typ=1.5A | SOT-25 |
| US3177H | 0.75A Power Distribution Switch Active High | 2.7V~5.5V | - | Typ=65uA | <1uA | Typ=100mΩ | Typ=1.0A | SOP-8 MSOP-8 |
| US3177L | 0.75A Power Distribution Switch Active Low | 2.7V~5.5V | - | Typ=65uA | <1uA | Typ=100mΩ | Typ=1.0A | SOP-8 MSOP-8 |
| US3277H | 1.2A Power Distribution Switch Active High | 2.7V~5.5V | - | Typ=65uA | <1uA | Typ=100mΩ | Typ=1.5A | SOP-8 MSOP-8 |
| US3277L | 1.2A Power Distribution Switch Active Low | 2.7V~5.5V | - | Typ=65uA | <1uA | Typ=100mΩ | Typ=1.5A | SOP-8 MSOP-8 |
| US3377H | 1.6A Power Distribution Switch Active High | 2.7V~5.5V | - | Typ=65uA | <1uA | Typ=100mΩ | Typ=2.0A | SOP-8 MSOP-8 |
| US3377L | 1.6A Power Distribution Switch Active Low | 2.7V~5.5V | - | Typ=65uA | <1uA | Typ=100mΩ | Typ=2.0A | SOP-8 MSOP-8 |
| US3477H | 2.0A Power Distribution Switch Active High | 2.7~5.5V | - | Typ=65uA | <1uA | Typ=100mΩ | Typ=2.5A | SOP-8 MSOP-8 |
| US3477L | 2.0A Power Distribution Switch Active Low | 2.7~5.5V | - | Typ=65uA | <1uA | Typ=100mΩ | Typ=2.5A | SOP-8 MSOP-8 |
| US3577H | 2.8A Power Distribution Switch Active High | 2.7V~5.5V | - | Typ=65uA | <1uA | Typ=100mΩ | Typ=3.7A | SOP-8 MSOP-8 |
| US3577L | 2.8A Power Distribution Switch Active High | 2.7V~5.5V | - | Typ=65uA | <1uA | Typ=100mΩ | Typ=3.7A | SOP-8 MSOP-8 |
| US210AD |
160mΩ, 2.5A High-Side POWER-DISTRIBUTION SWITCHES * Operating range: 2.7V~5.5V * High-side MOSFET: 160mΩ (TYP.) * Quiescent supply current: 25μA(TYP.) * Standby supply current: 1μA (Max.) * 1A Continuous Output Current* Programmable current limit,1A(TYP.) * Reverse input-output voltage protection * Built-in soft-start * Under-voltage Lockout |
2.7V~5.5V | - | <45uA | <1uA | Typ=160mΩ | Typ=1.1A | SOT-25 |
| US205 |
100mΩ, 2A High-Side Power Switches With Flag * High-Side NMOSFET: 100mΩ (TYP) * Input Voltage Varies From 2.7V to 5.5V * Low Supply Current: 20μA * Over Current Protection * Short Circuit Protection * Under Voltage Lockout * Thermal Protection with Foldback * Slew Rate Limited Turn-On Time 3ms (5V) * Reverse Blocking Current * RoHS Compliant * Available with Active-Low / High Enable |
2.7V~5.0V | 300mW | <70uA | <1uA | Typ=100mΩ | Typ=2.0A | SOP-8 |
| US206 |
0.7A POWER DISTRIBUTION SWITCH * Operating on The Range of 3.0V to 5.5V * High-Side MOSFET with 85mΩ RDS(ON) * Quiescent Supply Current: 65μA * Available With 4 Versions of Current Limits with Foldback * Rise Time: 400μS (TYP.) * UVLO (Under Voltage Lockout) * Output Shutdown Pull-low Resister * Shutdown Supply Current: 1μA (MAX.) * Logic Level Enable Pin, Available with Active-High or Active-Low Version * Reverse Current is Not Generated when in Power Off State * Deglitched Open-Drain Over-Current Flag Output (OC ) |
3.0V~5.5V | 400mW | <65uA | <1uA | Typ=95mΩ | Typ=0.7~2.0A | SOT-25 |
| US1528 |
2.0A USB High-Side Power Switch Advance Information * Open-Drain Fault Flag * Low on-Resistance MOSFET: Typical 110mΩ(at 5.0V) * Operating Voltage Varying From 3.0V to 5.5V * Output can be Forced Higher than Input when Operating in Off State. * Slow Turn-On (Soft-Start) and Fast Turn-Off * On-State Supply Current: 100 μA (TYP) * Standby Supply Current: 1μA (TYP) * Current Limit: 1.4A (TYP) * Thermal Shutdown Protection Circuit * UVLO (Under-Voltage Lockout): 2.4V (TYP) * Available with Active-Low / High Enable |
3.0V~ 5.5V | 470mW | <160uA | <5uA | Typ=110mΩ | Typ=2.7A | SOP-8 |
| US2076 |
0.5A Dual USB high side power swtich Active High Output Rise Rime 500μs Typical * MOSFET with Low On-Resistance: 140mΩ max.@5.0V per Channel * Continuous Load Current: 500mA (MIN.) per Channel * Off-State Supply Current: 1μA (TYP.) * Output can be Forced Higher than Input (Off-State) * Current Limit up to 1.25A (MAX.) * Input Supply Voltage: 3.0V ~ 5.5V * On-State Supply Current: 110μA (TYP.) * Thermal Shutdown Protection Circuit * UVLO (Undervoltage Lockout): 2.4V (TYP.) * Open-Drain Fault Flag * 1ms Turn-On (Soft-Start) and Fast Turn-Off * Compliant to USB Specifications * Available with Active-Low / High Enable |
3.0V~ 5.5V | 470mW | Typ=110uA | Typ=25uA | <100mΩ | Typ=0.75A | SOP-8 |
| US3076-US3376 |
0.5A Dual USB High-Side Power Switch * Operating on the Range of 3V to 5.5V * High-Side MOSFET with 87mΩ RDS(ON) * Quiescent Supply Current: 65μA * Available with 4 Versions of Current Limits with Foldback * Rise Time: 400μS (TYP) * UVLO (Under Voltage Lockout) * Shutdown Supply Current: 1μA (MAX) * Reverse Current is not Generated when in Power Off State * Deglitched Open-Drain Over-Current Flag Output (OC ) * Available with Active-Low / High Enable * US3076:0.75A, US3176:1A, US3276:1.5A, US3376:2A |
2.7V~5.5V | 470mW | <150uA | <1uA | Typ=87mΩ | Typ=0.75A | SOP-8 MSOP-8 |
| US16855 |
0.6A Dual USB High-Side Switch for USB Application Active High * 4V ~ 5.5V operating range * Two P-channel power MOSFET control switch * Over-current protection * Under-voltage lockout circuit * Thermal shutdown circuit * Soft-start circuit * Flag indicates fault conditions |
4.0V~5.5V | 300mW | <1.5mA | <5uA | Typ=100mΩ | Typ=0.9A | SOP-8 |
| US2075A |
0.8A Dual Channel Power Distribution Control Switch for USB Output Rise Time 5.0ms Typical active-low * 100 μA MAX operating current * 5μA MAX standby current * 3.5V ~ 5.5V operating range * Two P-channel power MOSFET control switch * Over-current protection * Under-voltage lockout circuit * Thermal shutdown circuit * Soft-start circuit * Flag indicates fault conditions |
3.5V~ 5.5V | 300mW | <100uA | <5uA | Typ=105mΩ | Typ=0.9A | SOP-8 |
| US2075C |
0.6A Dual Channel Power Distribution Control Switch for USB Output Rise Time 5.0ms Typical active-high * 100 μA MAX operating current * 5μA MAX standby current * 3.5V ~ 5.5V operating range * Two P-channel power MOSFET control switch * Over-current protection * Under-voltage lockout circuit * Thermal shutdown circuit * Soft-start circuit * Flag indicates fault conditions |
3.5V~ 5.5V | 300mW | <100uA | <5uA | Typ=105mΩ | Typ=0.9A | SOP-8 |
| US2175 |
Dual USB High Side Power Switch Active High * Open-Drain Fault Flag. * High-Side MOSFET Switch with 5V Input Voltage * 110mΩ RDS(ON) Meets USB Voltage Drop Requirements for Maximum Transmission Wire Length * Load Current: 1A * Output Can be Forced Higher Than Input (Off-State) * On-State Supply Current: 65μA (TYP.) * Off-State Supply Current:.1μA (TYP.) * Current-Limit / Short Circuit Protection and Thermal Shutdown Protection Under Overcurrent Condition * UVLO Makes the Switch OFF at Start UP * With Slow Turn ON and Fast Turn OFF * Enable Active-Low or Active-High |
7.0V | 625mW | Typ=65uA | Typ=1uA | Typ=110mΩ | Typ=1.3A | SOP-8 |
| US2026A |
Dual Channel USB Power Switch and Over Current Protection Output Rise Time 160μs Typical * Two P-channel power MOSFET control switch * 110μA Max operating current * 5μA Max standby current * 145 mΩ Max switch resistance * 2.7V ~ 5.5V input voltage range * 500mA minimum continuous load current * Smooth turn-on eliminates in-rush induced voltage drop * 1 ms fault flag delay filters Hot-Plug events * Over-current protection * Under-voltage lockout circuit * Thermal shutdown protection * Flag indicates fault conditions |
2.7V~ 5.5V | 300mW | <110uA | <5uA | Typ=105mΩ | Typ= 1.5A | SOP-8 |
| US204 |
100mΩ, 1.1A Dual High-Side Power Switches With Flag * 100mΩ(Typ) N-Channel MOSFET * Supply Current: – Switch On : 60μA (Typ) – Switch Off : 1μA (Typ) * Load Current 1.5A for US204AH/AL and 1.0A for US204CH/CL * Input Voltage from 2V ~ 5.5V * In Off-State: Output Voltage can be Higher than Input *AH:1.5A/Active High, AL:1.5A/Active Low CH:1A/Active High, CL:1A/Active Low |
2.0V~5.5V | 300mW | <90uA | <1uA | Typ=100mΩ | Typ=1.5A | SOP-8 |
| US94060 |
High-Side Power Switch Active High Ton_Dly 0.85us * Operating voltage range:1.8V ~ 5.5V * Providing 2A continuous operating current * P-channel MOSFET’s RON : 175mΩ typical * Built-in level shift for control logic * Quiescent current is as low as 2μA * Micro-power shutdown less than 1μA |
1.8V~5.5V | 270mW | Typ=2uA | <1uA | Typ=175mΩ | - | SOT-26 |
| US94061 |
High-Side Power Switch Active High Ton_Dly 0.85us Rshutdown 200Ω * Operating voltage range:1.8V ~ 5.5V * Providing 2A continuous operating current * P-channel MOSFET’s RON : 175mΩ typical * Built-in level shift for control logic * Quiescent current is as low as 2μA * Micro-power shutdown less than 1μA * Built-IN Level Shift Circuitry: Controlled 1μs Turn-ON Rise-Time Fast 60ns Turn-OFF Fall Time * Built-IN Fast-OFF Load Discharge Circuit |
1.8V~5.5V | 270mW | Typ=2uA | <1uA | Typ=175mΩ | - | SOT-26 |
| US12231 |
Power Interface Switch Active High * Meets the ExpressCardTM standard (ExpressCard|34 or ExpressCard|54) * Compliant with the ExpressCardTM compliance checklists * Fully satisfies the ExpressCardTM implementation guidelines * Supports systems with WAKE function * TTL-Logic compatible inputs * Short circuit and thermal protection * -40°C ~ 85°C ambient operating temperature range |
3.0V~3.6V | 704.2mW | <150uA | <1uA | Typ=120mΩ | Typ=1.3A | TSSOP-20 |
| US211 |
0.6A High-Side Power Switches With Flag * 80mΩ(Typ) N-Channel MOSFET * Supply Current: – Switch On : 25μA(Typ) – Switch Off : 1μA (Typ) * Load Current 500mA for US211 and 1.0A for US211A/B/C Blank:0.6A, A:1.1A, B:1.3A, C:1.5A * Input Voltage from 2V ~ 5.5V * In Off-State: Output Voltage can be Higher than Input * Available with Active-Low / High Enable |
2.0V~5.5V | 250mW | <45uA | <1uA | Typ=80mΩ | Typ=0.8A | SOT-25 |
| US212 |
0.5A SINGLE CHANNEL CURRENT-LIMITED POWER SWITCH * Single USB Port Power Switches * Over-Current and Thermal Protection * 0.8A Accurate Current Limiting * Reverse Current Blocking * 110 mΩ On-Resistance * Input Voltage Range: 2.7V~5.5V * 0.6ms Typical Rise Time * Very Low Shutdown Current: 1μA (max) * Fault Report (FLG) with 7ms deglitch capability * Ambient Temperature Range -40°C~+85°C * Available with Active-Low / High Enable |
2.7V~5.5V | - | <70uA | <1uA | Typ=110mΩ | Typ=0.5A | SOP-8 |
| US222 |
2.0A High-Side Power Switches With Flag * Low MOSFET On Resistance: 85mΩ * Compliant to USB Specifications * Available 4 Versions of Continuous Load: AL/AH: 2.0A, BL/BH: 1.5A, CL/CH: 1.0A, DL/DH: 0.5A * Logic Level Enable Pin: Available with Active-high or Active-low Version * Low Supply Current: 68μA (Typ.) * Low Shutdown Current: 1.0μA (Max) * Soft Start-up * Under-voltage Lockout * Over-current Protection * Over Temperature Protection * Load Short Protection with Fold-back * Deglitched FLAG Output with Open Drain * No Reverse Current When Power Off * With Output Shutdown Pull-low Resistor |
5.5V | - | <95uA | <5uA | Typ=85mΩ | Typ=2.0A | SOT-25 |
| US223 |
2.1A High-Side Power Switches With Flag * Input Voltage Varies From 3.5V to 5.5V * Built-in N-MOSFET * Output Can Be Forced Higher Than Input (Off-State) * Typical Low Supply Current: - Switch On: 25μA (TYP) - Switch Off: 0.1μA (TYP) * Open-Drain Fault Flag Output To Indicate Fault Conditions * Protection Circuits: - Soft-start( Hot plug-in application) - UVLO 1.7V (TYP.) - Current Limiting Protection - Thermal Shutdown Protection * Reverse Current Flow Blocking (No Body Diode) *AH/AL: 3.2A, BH/BL: 2.5A, CH/CL: 1.8A, DH/DL: 1.1A |
3.5V~5.5V | 400mW | <120uA | <1uA | Typ=80mΩ | Typ=2.1A | SOT-25 |
| US251 |
0.5A CURRENT-LIMITED POWER-DISTRIBUTION SWITCHES * Single Power Switch Family * 80-mΩ High-Side MOSFET * Rated currents of 0.5 A, 1 A, 1.5 A, 2 A * Accurate, Fixed, Constant Current Limit * Deglitched Fault Reporting * Output Discharge When Disabled * Reverse Current Blocking * Built-in Softstart * Current Limit:08: 0.8mA, 16: 1.6mA, 22: 2.2mA, 29: 2.9mA |
3.5V~5.5V | - | <70uA | <1uA | Typ=80mΩ | Typ=0.6~2.3A | SOT-25 |
| US236H |
* Operating Range: 4.5V~5.5V * Quiescent Supply Current: 50uA (TYP.) * Standby Supply Current: 1μA (Max.) * Output Voltage Switch to 5VSB at S3/S4/S5 400mΩ High Side Switch & 200mA Continuous Load Current * Output Voltage Switch to 5VCC at S0/S1/S2 80mΩ High Side Switch & 1.5A Continuous Load Current * Built-in Soft-Start * Fast Turn Off * Enable Active-High * Meets USB Current-Limiting Requirements |
4.5V~5.5V | 625mW | <70uA | <1uA |
Q1: Typ=80mΩ Q2: Typ=400mΩ |
Q1: Typ=2.3A Q2: Typ=0.75A |
SOP-8 |
| US301 |
0.2A SINGLE CHANNEL CURRENT-LIMITED LOAD SWITCH * Input voltage range: 2.7V~5.2V * Short-circuit protection and fast response time * Accurate current limiting: 0.4A * On-resistance:250 mΩ * Reverse-current blocking * Soft-start with 0.7ms typical turn-on time * Over-current and over-voltage protection * Thermal protection * Ambient temperature range: -40°C~+85°C |
2.7V~5.2V | - | <125uA | <0.1uA | Typ=250mΩ | Typ=0.2A | SOT-23-3 |
| US701 | - | - | - | - | - | - | - | SOT-26 |
| US2236032DB |
ULTRA SMALL, LOW INPUT VOLTAGE, LOW RON, LOAD SWITCHES * Integrated P-Channel Load Switch * Input Voltage: 1V to 3.6V * 1 A Maximum Continuous Switch Current * On-Resistance (Typical Values) RON = 28 mΩ at VIN = 3.6V RON = 33 mΩ at VIN = 2.5V RON = 42 mΩ at VIN = 1.8V RON = 70 mΩ at VIN = 1.2V * Maximum Quiescent Current = 1 mA * Maximum Shutdown Current = 1 μA SOP-8 * Low Control Input Thresholds Enable Use of 1.2V, 1.8V, 2.5V and 3.3V Logic * Controlled Slew Rate to Avoid Inrush Currents: tR = 105μs at VIN = 3.6V |
1.0V~3.6V | 480mW | <1000uA | <1uA | Typ=75mΩ | Typ=0.6A | SOP-8 |
| US2236060B |
ULTRA-SMALL, LOW-INPUT VOLTAGE, LOW RON LOAD SWITCH * Low Input Voltage: 1.1V~3.6V * Ultra-Low On-State Resistance (RON) * Typical RON values -RON=44mΩ at VIN=3.6V -RON =50mΩ at VIN=2.5V -RON=58mΩ at VIN=1.8V -RON=83mΩ at VIN=1.2V * 1A Maximum Continuous Switch Current * Maximum Quiescent Current < 1μA * Maximum Shutdown Current < 1μA * Low Control Input Thresholds Enable Use of Low-Voltage Logic * Controlled Slew Rate to Avoid Inrush Currents |
1.1V~3.6V | 480mW | <1uA | <1uA | Typ=44mΩ | Typ=1A | SOP-8 |
| US2236090 |
ULTRA-SMALL, LOW-INPUTVOLTAGE LOW RON LOAD SWITCH * Input Voltage: 1.1V~3.6V * Ultra-Low ON-State Resistance RON=66mΩ at VIN=3.6V RON =75mΩ at VIN=2.5V RON=90mΩ at VIN=1.8V RON=135mΩ at VIN=1.2V * 500mA Maximum Continuous Switch Current * Quiescent Current < 1μA * Shutdown Current < 1μA * Low Control Input Threshold Enables Use of 1.2V/1.8V/2.5V/3.3V Logic * Controlled Slew Rate (5μs Max at 3.6V) * ESD Performance Tested Per JESD 22 2000V Human-Body Model (A114-B, Class II) 1000V Charged-Device Model (C101) |
1.1V~3.6V | 480mW | <1uA | <1uA | Typ=66mΩ | Typ=0.5A | SOP-8 |
| US2236090D |
ULTRA-SMALL, LOW-INPUTVOLTAGE LOW RON LOAD SWITCH * Input Voltage: 1.1V~3.6V * Ultra-Low ON-State Resistance RON=66mΩ at VIN=3.6V RON =75mΩ at VIN=2.5V RON=90mΩ at VIN=1.8V RON=135mΩ at VIN=1.2V * 500mA Maximum Continuous Switch Current * Quiescent Current < 1μA * Shutdown Current < 1μA * Low Control Input Threshold Enables Use of 1.2-V/1.8-V/2.5-V/3.3-V Logic * Controlled Slew Rate (5μs Max at 3.6V) * Quick Output Discharge * ESD Performance Tested Per JESD 22 2000V Human-Body Model (A114-B, Class II) 1000V Charged-Device Model (C101) |
1.1V~3.6V | 480mW | <1uA | <1uA | Typ=66mΩ | Typ=0.5A | SOP-8 |
| US2236095 |
ULTRA-SMALL, LOW-INPUTVOLTAGE LOW RON LOAD SWITCH * Low Input Voltage: 1.0V~3.6V * Ultra-Low ON Resistance -RON=78mΩ at VIN=3.6V -RON =93mΩ at VIN=2.5V -RON=109mΩ at VIN=1.8V -RON=146mΩ at VIN=1.2V * 500mA Maximum Continuous Switch Current * Ultra Low Quiescent Current: 82nA at 1.8V * Ultra Low Shutdown Current: 44nA at 1.8V * Low Control Input Thresholds Enable Use of 1.2V/1.8V/2.5V/3.3V Logic * Controlled Slew Rate to Avoid Inrush Currents: 40μs tr * ESD Performance Tested Per JESD 22 -2000V Human-Body Model (A114-B, Class II) -1000V Charged-Device Model (C101) |
1.0V~3.6V | 480mW | <0.88uA | <0.7uA | Typ=78mΩ | Typ=0.5A | SOP-8 |
| US2236095D |
ULTRA-SMALL, LOW-INPUTVOLTAGE LOW RON LOAD SWITCH * Low Input Voltage: 1.0V~3.6V * Ultra-Low ON Resistance RON=78mΩ at VIN=3.6V RON=93mΩ at VIN=2.5V RON=109mΩ at VIN=1.8V RON=146mΩ at VIN=1.2V * 500mA Maximum Continuous Switch Current * Ultra Low Quiescent Current: 82nA at 1.8V * Ultra Low Shutdown Current: 44nA at 1.8V * Low Control Input Thresholds Enable Use of 1.2V/1.8V/2.5V/3.3V Logic * Controlled Slew Rate to Avoid Inrush Currents US2236095: 40μs TR * ESD Performance Tested Per JESD 22 2000V Human-Body Model (A114-B, Class II) 1000V Charged-Device Model (C101) 0.8mm×0.8mm, 0.4mm Pitch, 0.5mm Height |
1.0V~3.6V | 480mW | <0.88uA | <0.7uA | Typ=78mΩ | Typ=0.5A | SOP-8 |
| US2236095DB |
ULTRA-SMALL, LOW-INPUTVOLTAGE LOW RON LOAD SWITCH * Low Input Voltage: 1.0V~3.6V * Ultra-Low ON Resistance RON=78mΩ at VIN=3.6V RON =93mΩ at VIN=2.5V RON=109mΩ at VIN=1.8V RON=146mΩ at VIN=1.2V * 500mA Maximum Continuous Switch Current * Ultra Low Quiescent Current: 82nA at 1.8V * Ultra Low Shutdown Current: 44nA at 1.8V * Low Control Input Thresholds Enable Use of 1.2-V/1.8-V/2.5-V/3.3-V Logic * Controlled Slew Rate to Avoid Inrush Currents: 220-μs tr * ESD Performance Tested Per JESD 22 2000-V Human-Body Model (A114-B, Class II) 1000-V Charged-Device Model (C101) |
1.0V~3.6V | 480mW | <0.88uA | <0.7uA | Typ=78mΩ | Typ=0.5A | SOP-8 |
| US2236108DB |
ULTRA-SMALL, LOW-INPUTVOLTAGE LOW RON LOAD SWITCH * Low Input Voltage: 1.0V~3.6V * Ultra-Low ON-State Resistance RON=90mΩ at VIN=3.6V RON =100mΩ at VIN=2.5V RON=114mΩ at VIN=1.8V RON=172mΩ at VIN=1.2V * 500mA Maximum Continuous Switch Current * Ultra Low Quiescent Current: 82nA at 1.8V * Ultra Low Shutdown Current: 44nA at 1.8V * Low Control Input Thresholds Enable Use of 1.2V, 1.8V, 2.5V, 3.3V Logic * Controlled Slew Rate to Avoid Inrush Current: 220μs |
1.0V~3.6V | 480mW | <0.88uA | <0.7uA | Typ=90mΩ | Typ=0.5A | SOP-8 |
